Fiberglass cloth, also known as fiberglass fabric, is an excellent choice when you are looking for a strong, light weight part.

All of our fabrics must be used with a resin system (polyester, vinyl ester or epoxy) to create a composite part. The fiberglass is what gives any part it’s strength. It is used in a great variety of applications.  Boats, bathtubs, wind turbines, RC, surfboards, kayaks, canoes, aerospace . The list could go on and on.

The fabrics we have can be separated into 4 popular categories-

  1. RC
  2. Boat/marine
  3. Aerospace
  4. Surfboard

Keep in mind that these different fabrics are not limited in their category.  They can be used in a variety of projects.

The RC cloth is style #106 and #108,

Style #106 is a .75 oz. cloth. It is very lightweight and most often used on model airplanes. Because it is so lightweight, it can be tricky to use. You will want to use protective latex gloves or some other kind of smooth gloves. Any kind of skin tag will catch on the fabric. Style #106 is stronger than mylar. You don’t want to use it on anything requiring strength though.

Style #108 is another RC cloth. It is 1.5 oz. You will still need to be careful when working with this fabric but it is stronger than the .75 oz.

Style #1522 and #3733 are our most common surfboard cloths.  They can also be used on canoes, kayaks and boats

Style #1522 is a nice, smooth 4oz. cloth. Surfboard hobbyists use it to coat foam core.  It can also be used as a surfacing layer. It creates a clear, transparent laminate when saturated with resin.  This cloth wets out easily.

Style #3733 is a 5.6oz., aka sailboat cloth. This cloth is typically used on surfboards and general purpose projects.

Style #120 and #7781 are mainly used in the aerospace industry.

Style #120 is 3.2 oz. It is a 1:6 scale cloth for RC airplanes. You want to use this fabric when strength is needed. It is used on RC racing planes that go up to 140mph. This style is aerospace grade.

Style #7781 is an 8.9oz., four harness satin weave. Four harness means there is a three by one interfacing where a filling yarn floats over three warp yarns and under one. This weave conforms to curved surfaces. It is aerospace grade and is the second most popular aerospace cloth behind style #120.

Styles 7532 and 7500 fall in the boat/marine category.

Style #7532 is a 7.5oz. cloth. It is more commonly known as an 8oz. cloth. It is a  popular boat cloth. It is a plain weave and is stronger and sturdier than the 6oz. It is often used for waterproofing boat decks.

Style #7500 is the most popular general purpose fabric and also a great boat making cloth.  It is widely used in the fiberglass industry. It is good for making molds. It is typically used after the mat layer in a mold.  It gives it strength. It is also used in boat construction and repair.

We also carry fiberglass tape in widths from 1” to 12”.  They are 50 yard rolls.  They have selvage edges that keep it from un-raveling. They do not have an adhesive backing.  Just like our regular fabrics, they are meant to be used with resin. Our tapes work great on smaller applications and if you will be winding. They are also often used on glass seams and in repair work.

All of our fabrics are pretty easy to handle. Remember you will want to pick the best weight of fabric for your project but you will also want it to be strong enough.

To see all of the products we have available, go to www.fiberglasswarehouse.com .

Save

By Dallin Leach 12 comment

Share:

comments (12)

  • Fiberglass Warehouse

    @Mark Bornais- Not knowing what all the loads and stresses will be, and your weight requirements, I would probably look at Knitted Fabric 1708. It has 2 layers of unidirectional laid at the +/-45 respectively, and mat stitched together. Because of the +/- 45, it will help with the torsion. You will add about .050” in thickness. If that is too thick, 10 oz cloth will help also.

  • Mark Bornais

    I am repairing a truck camper torsion box roof. What weight cloth would you recommend on top of luan top sheet? Also, I plan on using 2 part epoxy for resin. Will this offer good structural strength for the top sheet of the torsion box?
    Thank you
    Mark

  • Fiberglass Warehouse

    @Tyler Yates- You could use a 10 ounce fiberglass cloth.

  • Tyler Yates

    I’m planning on doing so glass work to my knock off gheenoe; such as beef up the transom, lay down false floor, and build a casting deck. What type of glass would you recommend for each of those applications?

  • Fiberglass Warehouse

    @Mike- I would recommend vinyl ester resin. It is strong and has good elongation. You can use mat or cloth with it.

Leave a comment

Your email address will not be published. Required fields are marked *

Please note, comments must be approved before they are published

Just added to your wishlist:
My Wishlist
You've just added this product to the cart:
Go to cart page